Windsor Machines Limited held its Board of Directors meeting on May 09, 2026, commencing at 04:20 p.m. and concluding at 06:55 p.m. The board approved the audited standalone and consolidated financial results for the quarter and year ended March 31, 2026, alongside several significant corporate decisions including a director appointment, a resignation, auditor re-appointments, and a proposal for the sale of industrial plots in Thane. On a consolidated basis, the company reported a net profit of Rs. 64.23 lakhs for the year ended March 31, 2026, compared to a net loss of Rs. 322.55 lakhs in the prior year, marking a meaningful turnaround. Consolidated revenue from operations rose to Rs. 57,049.57 lakhs from Rs. 36,872.11 lakhs year-on-year.

FY26 Standalone Financial Performance

The standalone financial results for the year ended March 31, 2026 reflect a notable improvement in revenue, though the company continued to report a net loss. The standalone results have been restated to account for the Scheme of Amalgamation of Global CNC Private Limited, a wholly-owned subsidiary, with the company, effective April 1, 2025, following approval from the Hon'ble National Company Law Tribunal, Ahmedabad Bench on March 19, 2026. The following table summarises the key standalone financial metrics:

FY26 Consolidated Financial Performance

On a consolidated basis, the company reported improved performance for the year ended March 31, 2026, with the results including Unitech Workholding Systems Private Limited as a wholly owned subsidiary with effect from February 10, 2026.

Standalone Segment Performance

The standalone segment revenue for the year ended March 31, 2026 showed strong growth across key divisions, as detailed below:

Consolidated Segment Performance

On a consolidated basis, segment revenue for the year ended March 31, 2026 also reflected broad-based growth, with the CNC & VMC Machinery segment benefiting from the inclusion of Unitech Workholding Systems Private Limited.

Balance Sheet Highlights

The standalone and consolidated balance sheet positions as at March 31, 2026 are summarised below:

Thane Industrial Plot Sale Proposal

The board approved a proposal for the sale of vacated industrial plots at Plot No. E-6 and E-6(A), admeasuring a total of 21,912 sq. meters, located at Wagale Thane Industrial Area, Panchpakhadi, Thane, Maharashtra. Key details of the proposed transaction are as follows:

The company stated that no business operations are carried out on the said land and building, and the sale will not impact its business operations. The sale proceeds are intended to be used for the ongoing setup of the Rajkot Plant, working capital for expansion, and other general corporate purposes. The transaction is subject to signing of definitive agreements and necessary regulatory and statutory approvals.

Manufacturing Consolidation and Exceptional Items

Windsor Machines has been consolidating its manufacturing operations by shifting both its Extrusion machinery plant from Vatva (Dist. Ahmedabad) and Injection machinery plant from Chhatral (Dist. Gandhinagar) to a new integrated manufacturing facility at Chibhda, Dist. Rajkot. The Injection machinery plant shifting was completed at a one-time cost of Rs. 215 Lakhs, while the Extrusion machine plant shifting was substantially completed at a one-time cost of Rs. 266.64 Lakhs. The company paid a total one-time amount to union workers at Extrusion and Injection of Rs. 225.07 Lakhs and Rs. 486.54 Lakhs respectively, and settled Thane workers' claims for Rs. 450.00 Lakhs. Accordingly, Rs. 1,161.61 Lakhs was accounted as an exceptional item in the quarter ended June 30, 2025. Additionally, during the quarter ended March 31, 2026, Unitech sold Balsar, Rajkot land and building at Rs. 675 Lakhs, resulting in a gain of Rs. 465 Lakhs accounted as exceptional items.

Key Corporate Developments

The board approved several significant corporate actions during the meeting, including the appointment of Mr. Dharmendra Becharbhai Varasada as Additional Director designated as Executive Director. Pursuant to Regulation 30 of SEBI Listing Regulations, the company disclosed the appointment details as required under Schedule III and the SEBI Master Circular dated January 30, 2026. Mr. Varasada is not debarred from holding the office of a director by virtue of any order of SEBI or any other authority, and no relationships exist between him and other directors of the company.

Mr. Dharmendra Becharbhai Varasada brings more than 2.5 decades of technical experience in manufacturing and was the technical brain behind Global CNC Private Limited, which was amalgamated with Windsor Machines Limited. He oversees the company's production, technology solutions, and service functions, with expertise spanning Plastic Injection Moulding Machines, Pipe Extrusion Machines, Blown Film Machines, CNC Machines, VMC Machines, SPM Machines, and Fixtures. The statutory auditors, M/s. S K Patodia & Associates LLP, issued an audit report with an unmodified opinion on both the standalone and consolidated financial results for the quarter and year ended March 31, 2026. The results were reviewed and recommended by the Audit Committee before being approved by the Board of Directors at the meeting held on May 09, 2026.

Windsor Machines Limited has informed the stock exchanges of the opening of a special window for re-lodgement of transfer requests pertaining to physical shares, in compliance with Regulation 30 of the Securities and Exchange Board of India (Listing Obligations and Disclosure Requirements) Regulations, 2015. The disclosure was made on May 07, 2026, through newspaper advertisements published in Financial Express in both English and Gujarati languages.

Background and Regulatory Context

The special window facility was introduced in continuation of SEBI's earlier circular dated July 02, 2025, which enabled re-lodgement of transfer deeds of physical shares that were lodged prior to April 01, 2019 but were rejected or returned due to deficiencies in documents or process. SEBI further extended this facility through a subsequent circular dated January 30, 2026, keeping the special window open for a period of one year, from February 05, 2026 to February 04, 2027.

The window is also available for transfer requests that were submitted earlier and were rejected, returned, or not attended to due to deficiencies in documents, process, or otherwise.

Key Features of the Special Window

The following are the key features of the special window as communicated by Windsor Machines Limited:

• The special window is open for a period of one year, from February 05, 2026 to February 04, 2027
• Securities re-lodged for transfer shall be issued exclusively in demat (dematerialised) form
• Securities transferred under this window shall be under lock-in for a period of one year from the date of registration of transfer
• During the lock-in period, such securities shall not be transferred, lien-marked, or pledged

How to Avail the Facility

Eligible shareholders who wish to avail this opportunity are requested to submit the requisite documents to the company's Registrar and Share Transfer Agent:

Company and Signatory Details

The regulatory filing was signed by Rohit Sojitra, Company Secretary and Compliance Officer of Windsor Machines Limited, on May 07, 2026. The place of signing was noted as Rajkot, and his ICSI Membership Number is A53823.

Shareholders are encouraged to take advantage of this special window introduced in the interest of investors and to ensure timely dematerialisation of their physical securities.