Manaksia Coated Metals & Industries Limited secured shareholder approval for its merger with JPA Snacks Private Limited during an NCLT-convened meeting on June 8, 2026. The resolution, which required a special majority, received overwhelming support with 99.99% of valid votes cast in favour. This approval marks a critical step in the consolidation process between the two entities, subject to final sanction by the Hon'ble National Company Law Tribunal, Kolkata Bench.

The meeting, conducted via video conferencing, was chaired by Mr. Parikshit Poddar, Advocate, as appointed by the Tribunal. Ms. Bidisha Achari served as the Scrutinizer to oversee the voting process. Key attendees included Mrs. Shruti Agarwal, Company Secretary & Compliance Officer, and Mr. Mahendra Kumar Bang, Chief Financial Officer. The proceedings commenced at 11:00 a.m. IST and concluded at 11:31 a.m. IST.

Remote e-voting facilities were accessible from June 4, 2026, to June 7, 2026, facilitated by National Securities Depository Limited (NSDL). A total of 67 equity shareholders cast votes remotely, while 3 voted during the meeting. The combined results showed that 64 shareholders voted in favour, representing 5,94,24,836 shares, while 6 shareholders voted against, representing 55 shares.

The detailed voting breakdown indicates strong backing across categories. Promoters and the promoter group cast 58,787,940 votes entirely in favour. Public institutions and non-institutions also supported the resolution, with public non-institutions recording 5,113 votes in favour and 55 against. The total votes polled accounted for 56.15% of the outstanding shares.

The consolidated scrutinizer's report confirms the resolution was passed with the requisite majority under Section 230(6) of the Companies Act, 2013. The results have been submitted to NSE and BSE Ltd and are available on the company's website.

Manaksia Coated Metals & Industries Limited announced its audited financial results for the quarter and full year ended March 31, 2026. The Board of Directors, meeting on May 6, 2026, approved the standalone and consolidated results. The company reported a landmark financial year with revenue crossing ₹896 crore, profit after tax surging 164% year-on-year on a consolidated basis, and export volumes reaching an all-time high. In continuation to its earlier letter dated April 28, 2026, and pursuant to Regulation 30(6) and Regulation 46(2)(oa) read with Schedule III of SEBI (Listing Obligations and Disclosure Requirements) Regulations, 2015, the transcript of the Q4 FY26 Earnings Conference Call on Audited Financial Results (Consolidated and Standalone) for the quarter and year ended March 31, 2026, is now available on the company's website at www.manaksiacoatedmetals.com . The filing was signed by Shruti Agarwal, Company Secretary & Compliance Officer (Membership No.: F12124), dated May 11, 2026. The management attendees for the call included Mr. Karan Agrawal (Whole Time Director), Mr. Tushar Agrawal (Senior Vice President), and Mr. Mahendra Kumar Bang (CFO), moderated by Ms. Sana Kapoor from Go India Advisors.

Company Overview

MCMIL is a leading manufacturer and exporter of Alu-Zinc Steel and Pre-Painted Steel with 15+ years of experience, serving 240+ active customers across 20+ Indian states and over 22 countries worldwide across 5 continents. The company operates 1 manufacturing plant, supported by 4 branch offices and 5 stock yards & service centres that underpin a strong nationwide network.

Consolidated Financial Performance

MCMIL delivered strong growth across key financial metrics for the full year. On a consolidated basis, Revenue from Operations grew 13.50% YoY to ₹896.27 crore, while EBITDA expanded 49.21% to ₹92.21 crore. Profit After Tax (PAT) surged 164% to ₹40.69 crore from ₹15.39 crore in the previous year. For the quarter, revenue from operations rose 9.00% YoY to ₹228.74 crore, though EBITDA declined 8.72% YoY to ₹15.64 crore, with the EBITDA margin contracting 133 basis points to 6.84%, reflecting temporary pressure from elevated freight, energy, and input costs.

Consolidated Financial Highlights

Standalone Financial Highlights

On a standalone basis, the company reported a net profit of ₹4,097.15 lacs for the full year, compared to ₹1,564.33 lacs in the previous year. For the quarter, standalone net profit stood at ₹543.59 lacs. Basic EPS for the year was ₹4.18 on a standalone basis and ₹4.41 on a consolidated basis.

Balance Sheet Strength & Key Ratios

MCMIL significantly strengthened its balance sheet during the year, achieving its targeted Net Debt to EBITDA ratio of close to 1x, reflecting strong cash flows and continued deleveraging. The debt-equity ratio improved to 1.13x from 1.81x in the previous year, and the interest coverage ratio rose to 2.85x from 1.63x. The company's external credit rating was also upgraded during FY26, with the long-term rating upgraded to A from A- and the short-term rating upgraded to A1 from A2.

Operational Highlights

FY26 was marked by strong operational momentum across MCMIL's business segments. Production of Galvanized / Alu-Zinc Steel reached 1,03,036 MT for FY26, a growth of +2.21% YoY, while Pre-Painted Steel production grew +12.78% YoY to 83,594 MT. The value-added product mix — Pre-Painted Steel as a share of total sales — rose to 80% in FY26 from 74% in FY25, reflecting the company's deliberate premiumisation strategy. On the exports front, export tonnage touched an all-time high of 66,172 MT in FY26, up 110% YoY from 31,453 MT in FY25. The share of exports as a percentage of total revenue expanded to 68.21% from 39.20% in FY25, a growth of 97% YoY. As of the earnings call, the company's current order book stood in the range of ₹350 crore to ₹400 crore, largely from export customers.

Status of Key Strategic Projects

MCMIL continued to make progress on its expansion and sustainability initiatives during the year. The Alu-Zinc Coating Upgrade was commissioned in December 2025, increasing capacity from 1,32,000 TPA to 1,80,000 TPA, a 36% increase, making MCMIL one of the few producers in India with 100% aluminium-zinc coating capacity. The second colour coating line and a 7 MWp captive solar power plant at the Kutch facility are both targeted for commissioning in Q2 FY27. The captive solar plant is expected to offset 50% to 55% of grid power dependency, reducing effective power costs by up to 40%, translating into annual savings of up to Rs. 7 Cr. against a capex of Rs. 30 Cr. Looking further ahead, a new Alu-Zinc Coating Line 2 (Phase 2) with an estimated capex of Rs. 150 Cr. and a Cold Rolling Mill (CRM) Complex with an estimated capex of Rs. 200 Cr. are both targeted for FY28. The CRM complex will enable the company to shift from Cold Rolled Coils (CRC) to Hot Rolled Coils (HRC) as the primary raw material, supporting backward integration and improved procurement flexibility.

FY29 Vision

MCMIL has outlined an ambitious FY29 vision targeting a 3x increase in total output, revenue, and profitability from FY26 levels, underpinned by continued investments in capacity expansion, backward integration, and operational efficiency improvements. During the earnings call, management indicated that at peak utilisation of a 3,60,000-ton installed capacity, the company has the potential to generate revenue in the range of ₹2,500 crore to ₹2,700 crore per annum. Management also stated that any project the company invests in will be targeted at a ROCE of upwards of 20%.

Key Q&A Highlights from Earnings Call

During the Q&A session, management addressed several key investor queries. On the sustainability of EBITDA margins, management indicated that an EBITDA margin of anywhere between 10% to 12% is possible and sustainable for the foreseeable future, supported by the new alu-zinc product, upgraded technology, and export ramp-up. On the alu-zinc premium over galvanized steel, management indicated a ballpark premium of between ₹3,000 to ₹5,000 per ton in price realization. On the new colour coating line's incremental revenue contribution in FY27, management guided for an incremental revenue of anywhere between ₹300 crore to ₹500 crore over FY26 levels. On leverage, management confirmed the company will not breach a debt-equity level of 2x and will strive to maintain a range of between 1x to 1.5x. On cost pass-through, management confirmed that all incremental cost impacts from energy, raw materials, consumables, and freight have been successfully passed through to customers in new pricing for orders entered since April, and that any cost shock or benefit typically normalises within 1 to 2 months. On export market expansion, management highlighted the Americas region — including South America and Central America — as a key target market for alu-zinc products, noting that the company currently has no exposure to the U.S. market. Management also confirmed that as of the earnings call, the alu-zinc line was already operating at upwards of 60% to 65% capacity utilization, largely serving existing customers.

Dividend Recommendation & Board Approvals

The Board of Directors recommended a final dividend of Re. 0.05 (5%) per equity share for the financial year ended March 31, 2026, against a face value of Re. 1/- per share, subject to shareholder approval at the ensuing Annual General Meeting. If approved, the dividend will be paid within 30 days from the date of declaration. In addition, the Board approved the appointment of M/s Audittech 360 Financial Services Private Limited as Internal Auditor and M/s. S. Chhaparia & Associates as Cost Auditor for FY 2026-27. The Board also approved the re-appointment of Mr. Addanki Venkata Srinarayana as Wholetime Director for three years effective May 30, 2026, and increases in remuneration for Mr. Sushil Kumar Agrawal (Managing Director), Mr. Karan Agrawal (Wholetime Director), and Mr. Tushar Agrawal (Senior Vice-President), all subject to shareholder approval.

Management Commentary

Commenting on the results, Karan Agrawal, Whole Time Director, stated: "FY26 has been a landmark year for Manaksia Coated Metals & Industries Limited, marked by record revenue and strong growth in EBITDA and profitability, driven by higher exports, improved realizations, and an increasing share of value-added products. During the year, the company successfully commercialized its Aluminium-Zinc coating technology, strengthening its position in the premium coated steel segment. Despite temporary margin pressure in Q4 FY26 arising from elevated freight, energy, and input costs amid geopolitical disruptions, demand remained healthy and profitability continued to remain resilient. The company also made significant progress on its expansion and sustainability initiatives. From a balance sheet perspective, the company achieved its targeted Net Debt to EBITDA ratio of close to 1x, reflecting strong cash flows, disciplined capital allocation, and continued deleveraging. MCMIL remains focused on its strategic pillars of premiumisation, export growth, operational efficiency, and balance sheet deleveraging."